Added to Basket

21.2 kw
Net Power
3,770 – 4,170 kg
Operating Weight
0.10 m3
Bucket ISO Heaped
3,460 mm
Max Dig Depth

Hitachi ZX38U-5A

Download Brochure
  • Specifications
  • Net Power: 21.2 kw
  • Operating Weight: 3,770 – 4,170 kg
  • Bucket ISO Heaped: 0.10 m3
  • Max Dig Depth: 3,460 mm
Enquire Now
  • Specifications
  • Net Power: 21.2 kw
  • Operating Weight: 3,770 – 4,170 kg
  • Bucket ISO Heaped: 0.10 m3
  • Max Dig Depth: 3,460 mm

Enquiry Form

Built to the same high standards of quality, durability, efficiency and reliability as our world-renowned medium and large excavators, the Hitachi Zaxis ZX38U-5 will be an asset to your operation. With a spacious, air conditioned cab as standard, complete with a wide sliding and reclining adjustable suspension seat and adjustable armrest for operator comfort.

Specifications

Engine
Model
Yanmar 3TNV88
Type
4-cycle water-cooled, 3 cylinder direct injection diesel engine
Rated power
ISO 9249

21.2 kW at 2,400 min-1 (rpm)
Maximum torque
105.5 Nm at 1,000 min-1 (rpm)
Piston displacement
1.642 L
Bore and stroke
88 mm x 90 mm
Batteries
1 x 12 V / 55 Ah
Hydraulic System
Main System:
Maximum Oil Flow

2 x 38.4 L/min
1 x 22.8 L/min
Pilot Pump:
Maximum Oil Flow

10.8 L/min
Relief Valve Settings:
Implement Circuit
Swing Circuit
Travel Circuit
Pilot circuit

24.5 MPa
18.6 MPa
24.5 MPa
3.9 MPa
Drive, Swing and Dig
Travel Speeds:
High
Low

0 – 4.3 km/h
0 – 2.8 km/h
Swing:
Speed
Torque

9.1 min-1
6.0 kNw
Dig:
Max Digging Depth

3,460 mm
Service Capacities
Fuel tank
42.0 L
Engine coolant
3.9 L
Engine oil
7.2 L
Travel device (each side)
0.6 L
Hydraulic system
56.0 L
Hydraulic oil tank
32.0 L

Designed with you in mind...

  • The rugged cab is designed to ROPS standard and fitted with flat easy replicable glass.   A seatbelt, pilot control shut-off lever, swing parking brake and travel parking brake are all standard.
  • When moving the control lever to neutral, the auto idle automatically reduces engine speed to idling level four seconds later. This combined with the ECO mode and electric governor features significantly reduce fuel consumption. It also brings the additional benefits of lower noise levels and emissions.
  • Hose rupture valves to the boom and dipper prevents the boom and dipper from dropping in the event of a hose rupture. Offering additional safety and compliance on job sites.
  • HN Bushings are used at all pin joints at the front of the machine and the blade. The lubrication intervals have been extended to 500 hours, contributing to reduced wear of the pins and bushes.
  • Stack muffler fitted on the rear of the cab results in quieter operation.
  • Box sectioned rigid frame blade and short pilot shut off valve provide added durability.
  • Valve for extra piping.
  • Full manufacturers guarantee.
  • Excellent residual values, with a worldwide after sales network.
  • Short rear-end swing radius provides additional flexibility to manoeuvre and operate within tight, confined spaces. Easy trench excavation work is possible near walls, foundations and other obstacles – improving productivity in urban areas.
  • High machine performance is provided by the Hitachi closed centre load sensing hydraulic system. The HHH (Hitachi High-performance Hydraulic) system allows for smooth multi-function operation, regardless of the load.
  • The easy access cab with wide, adjustable, sliding and reclining suspension seat, enhanced armrest and folding foot pedals provide a comfortable working environment. The enlarged front window and door contribute to this further, while enhancing visibility.
  • Air Conditioning as standard, improving operator comfort and reducing operator exposure to dust and fatigue.
  • A large 3.5-inch multifunctional LCD monitor that is easy to view in bright sunlight or at night enables the machine’s technical data to be viewed at a glance, including status and settings, and is positioned within easy reach of the operator’s right hand.
  • The auto speed change system shifts down travel speed when the load exceeds a certain limit (for instance, when going downhill), and shifts up when the load is less. This gives smoother operations when dozing and turning, and also reduces track wear.
  • Neutral engine start system disables engine starting unless the lever is in lock position.
  • Powerful, large exhaust capacity 3-cylinder engine, giving substantial power for large excavating jobs.
  • Hydraulic pilot type control levers.
  • Wide opening steel inspection covers offer easy access to service points, allowing for quick daily inspection, servicing, cleaning and refueling, with the radiator and oil coolers positioned side by side for convenience. An optional tilting device for the floor of the cab provides even greater access for service and maintenance procedures.
  • Storage of the bucket cylinder hose in the arm, complete with protective guard prevents damage.
  • The battery is positioned on the same side as the radiator for easy maintenance.
  • The engine cover slides open vertically to allow easy access in tight spaces.

Comprehensive Support as Standard

Support Chain

At Hitachi we aim to help keep your investment operating safely and in peak performance at all times, to minimise downtime and protect the high residual value associated with the Hitachi product. The services, facilities and products available through the Hitachi Support Chain will help to achieve this, keeping your machine working at its maximum potential.

Peace of Mind

When purchasing a technologically advanced Hitachi product, you can buy safe in the knowledge that your purchase can be backed by an optional unique service and extended warranty program – SOLAS:

  • ervice by Hitachi trained engineers
  • nly genuine and approved parts
  • ife of contract annual inspections
  • ll-round cover
  • econd-hand value enhancement with full dealer service history
Finance

When purchasing machinery and equipment for construction projects, it always pays to have a solid financial foundation. Whatever your needs – new or used equipment, a single unit or an entire fleet – you can find flexible finance solutions from Hitachi Capital tailored to your business requirements.

Ready to Help

Talk to us!  If you have a question or would like to make an enquiry, please call us on 0191 430 8400 or use the contact form and we will call you back within 24hrs (or first thing Monday if it’s a weekend).

Top rates of pay.
a global company.

Work with us.

Copyright © 2018 Hitachi Construction Machinery (UK) Limited, Monkton Business Park North, Hebburn, Tyne and Wear NE31 2JZ. Tel: (0191) 430 8400